Illustrative four-bar bass note pattern on a dark piano-roll grid

To write a bass line for a game cue, keep the chords fixed, place their roots at clear harmonic checkpoints, then choose note lengths and rests against the kick. Add one small change at a time and check the last bar against the first when the cue loops. The four-bar example below gives you notes and durations you can enter into a MIDI editor; it is an illustrative exercise, not a transcription or a tested game cue.

Fix the chords before writing the bass

Start with a chord map rather than a bass sound. The worked exercise uses one bar each of A minor (A–C–E), F major (F–A–C), C major (C–E–G), and G major (G–B–D), all in 4/4. Keep that progression unchanged while you compare bass ideas. If you still need to choose the harmony under a tune, do that first with our guide to choosing chords for an existing melody. This exercise starts after that choice.

The chord root is a useful first bass note because it makes each change easy to hear. It is not a rule that the lowest note must always be the root: putting another chord tone in the bass changes the inversion. For this exercise, begin with A2, F2, C2, and G2 on the four downbeats. Those note names identify pitch classes and register; your MIDI editor may number octaves differently, so verify the sounding pitch rather than copying a displayed octave label blindly. Native Instruments demonstrates building an initial bass part from chord roots before changing its rhythm and notes in its bass-line tutorial.

Choose a bass instrument whose notes are audible in the cue’s actual arrangement, but leave patch shopping until the part works. A sustained synth, plucked synth, or sampled bass will give different note endings, so listen to the release as well as the attack. In a game cue, an ending that rings into the next loop can matter more than an impressive soloed preset. Keep the bass below the main melody in musical role, leaving its busiest gestures for moments when the melody is quiet. If the bass starts behaving like a second tune, our two-line writing guide is the better exercise.

Put the notes against a simple drum pulse

Set a plain 4/4 kick on beats 1 and 3 and a snare on 2 and 4 for the worksheet. That is a practice pulse, not a claim about what every game needs. Put a bass root on beat 1 of each bar first. Play the four bars with kick and chords. Then add an eighth-note attack on an offbeat only when it makes the next downbeat clearer. Syncopation means shifting an accent away from an expected strong beat; it does not mean moving MIDI notes at random. The eMastered bass-line guide also separates chord-note choice from rhythm and syncopation.

Decide how long each note lasts before adding another. A one-beat note followed by a one-beat rest leaves different room for the kick and melody than a two-beat hold. Rests are part of the bass part, not empty cells to fill. Mastering.com’s bass-line guide treats the bass as part of an ensemble that establishes harmony, supports melody, and interacts with drums. Use that relationship as a listening question: when the kick lands, does the bass attack reinforce it, answer it, or mask the space after it?

For the exercise, keep all attacks on the eighth-note grid. Count each bar as “1 and 2 and 3 and 4 and.” A note may last through later grid points, but the next note must not begin before the current one ends. This makes the loop boundary and every rest checkable in a piano roll.

Enter this four-bar bass part

The table is an original, illustrative MIDI worksheet. Each row is an event, not a suggestion to improvise between listed events. Beat 1.5 means the “and” after beat 1. Durations are in quarter-note beats; each bar totals four beats, including rests. Use a single monophonic bass lane and keep the four chords above fixed. A2, for example, means the A in the chosen low register, subject to your editor’s octave convention.

Bar and chord Start Event Length Purpose
1 · Am 1 A2 1.5 beats Root, with the first kick
1 · Am 2.5 Rest 0.5 beat Clear the snare tail
1 · Am 3 E3 0.5 beat Chord fifth
1 · Am 3.5 A2 0.5 beat Return to root
1 · Am 4 Rest 1 beat Leave room before F
2 · F 1 F2 2 beats New root on the kick
2 · F 3 C3 0.5 beat Chord fifth
2 · F 3.5 F2 0.5 beat Root again
2 · F 4 Rest 1 beat Space before C
3 · C 1 C2 1 beat Root on the kick
3 · C 2 Rest 1 beat Space under the lead
3 · C 3 G2 1 beat Chord fifth on the kick
3 · C 4 Rest 1 beat Prepare G
4 · G 1 G2 2 beats Root on the kick
4 · G 3 D3 0.5 beat Chord fifth
4 · G 3.5 G2 0.5 beat Return to root
4 · G 4 Rest 1 beat Release before bar 1

Enter the roots first, then the fifths, then the rests. This order lets you locate a problem: if the root-only version does not explain the chord changes, extra notes will not repair it. If the part feels too low or too high in your instrument, transpose the entire line by an octave before changing its harmony. Check that bar 4’s final G2 ends at beat 4, leaving beat 4 through the next bar’s downbeat silent. The next attack is A2 on bar 1, beat 1. The exact release gives that return a clean start.

Add movement without hiding the melody

The table uses roots and fifths, which makes it easy to see what each note does. To create one active version, replace bar 4’s beat-3 D3 with B2, the third of the G chord. Keep its half-beat duration and the following G2. You have changed one pitch, not the harmonic map or total bar length. An octave A3 could instead replace bar 1’s E3; that raises energy without introducing a new pitch class. Try one change at a time and compare it with the original.

A connecting note can point toward the following root, but its timing needs care. As a separate option, replace the final half beat of bar 4’s rest with G#2 at beat 4.5, ending exactly at the bar line. G#2 is outside the G-major triad and leads by a semitone to A2 on the next downbeat. It is a passing approach, not a new G-major chord tone. Keep the earlier half beat of rest at beat 4. This option gives a more insistent seam, so compare it with the completely silent final beat and retain it only if the melody leaves that space. Musician Wave’s bass-line guide discusses roots as checkpoints, connecting notes, rests, and octave changes; the precise bar-line choice here is our own exercise.

Here is a deliberate mistake to diagnose: hold that optional G#2 for a full beat from beat 4.5. It would cross the bar line and overlap the A2 attack at the start of bar 1. The correction is an eighth-note G#2 ending at the bar line, or deleting it and restoring the rest. The correction follows from the stated event times; it is not based on an undocumented listening test. If a more elaborate bass figure competes with the cue’s hook, remove the connecting note first, then remove extra fifths. Your chord progression remains the same throughout.

Compare a quiet part with an active part

Make a sparse copy of the four bars with only A2, F2, C2, and G2, each beginning at beat 1 and ending before the next chord. Make an active copy from the table, then audition the two beneath the same drums, chords, and lead. Keep playback level consistent so a louder patch does not win the comparison by volume alone. The sparse version may leave more room under dialogue or a sustained melody; the active one may help a cue that needs rhythmic motion. Those are possibilities to test in your own arrangement, not claims about a particular game.

Do not add a sub-bass track just because a tutorial shows one. Native Instruments adds a sub layer to solve a specific lack of low-end weight in its example. If your part already reads clearly, an extra layer creates another sound and another loop tail to manage. If you do layer, copy the same pitches and check the two note endings together before changing the balance. For a restricted channel palette, our chiptune loop guide shows how to assign a simple low line a job alongside other parts; the note worksheet here also works with a conventional bass instrument.

Test the return to bar one

Loop the four bars in three passes: bass alone, bass with the practice kick, and then the full cue. Watch the piano roll at the seam as well as listening. In the base table, the last note, G2, ends exactly at beat 4 and bar 1 begins with A2 on its downbeat; there is one beat of written rest. In the optional approach version, G#2 ends exactly on the bar line before A2 starts. If your synth has a release tail, the written rest does not prove the sound has stopped. Listen to or meter that tail, then shorten the note or its release if it obscures the new downbeat.

Check the transition when the music loops repeatedly, not just once. Does the A2 sound like a return after G2 or G#2? Does the kick on the new beat still have a clear attack? Does the melody continue or restart there, and is there enough room for it? If the cue has interactive layers, repeat the test with each layer combination you intend to use. For the separate question of delivering layers to a game, see our game audio stem guide. The table is a composition exercise; implementation and playback behavior still have to be checked in the actual project.

FAQ: Writing bass for game music

Should the bass play the root of every chord?

Start with roots to make the progression clear, then try a chord third, fifth, octave, or short approach note. Keep the chords fixed while comparing each change.

How do I keep a bass line from fighting the kick?

Check where both attacks land, then change one note length or insert a rest. Listen with the kick and full cue, because soloing the bass hides the interaction.

How many notes should a four-bar game loop use?

There is no required count. Begin with one root per chord, then add notes only when they clarify rhythm, harmony, or the return to bar one.

Can a bass note lead into the first chord of the loop?

Yes. A short approach note can lead into the first root, but it must end at the seam unless an overlap is intentional and checked in the actual cue.

Does the bass need a separate sub layer?

No. Add one only when the arrangement needs it, and check its note endings and balance alongside the main bass part.

Keep reading

CompositionBuild a Drum Groove for Your Game CueCompositionWrite a Horror Game Cue That Builds DreadCompositionPlan Your First Game Score, One Cue at a Time
GameScoreCraft Editorial

Practical guides for game composers. Each guide links the documentation, published surveys and maker pages it relies on, so you can check the claims yourself. About us · Report an error