
To write horror music for a game, decide what the player knows, build a short phrase with unresolved tension, and change its rhythm, register and density when the danger becomes visible. Start with a restrained version for an unseen threat. Then make a second version from the same notes for the reveal. The four-bar exercise below gives you both versions and a way to test them against play.
Decide what the player should know
Imagine an original, fictional scene: a player walks through a service corridor. A door closes somewhere behind them. They cannot see what caused it. Later, a figure appears at the far end of the corridor. The first cue should leave room for doubt; the second should acknowledge a visible threat. Neither version needs to tell the player whether escape is possible.
Write those dramatic instructions next to your session before you choose instruments. Composer Bobby Krlic described Returnal as sustaining a sense of surrounding threat even during fast action; he said Selene’s strength comes from her actions, so the score need not make her sound triumphant. That is a useful reminder that “enemy visible” does not automatically mean “heroic combat music.” His account is about his own game, not a recipe for this fictional corridor. Read Krlic’s interview on PlayStation Blog.
For the corridor, set two cue instructions: unseen means one recurring sound with gaps long enough to hear the room; revealed means the phrase becomes more insistent but keeps its unsettled pitch relationship. If the scene is a loop, write a phrase that can return to its first bar without a final cadence. For implementation choices such as vertical layers or transitions, see our guide to adaptive game music. Here the task is to compose the material those systems would play.
Make one interval carry the tension
Set a 4/4 grid at an illustrative 72 BPM. Put a quiet C3 under the phrase, then place D-flat4 above it. C and D-flat are adjacent pitch classes, but this voicing spreads them across more than an octave; move D-flat down to D-flat3 and compare the tighter friction. Keep whichever version lets the corridor ambience remain audible. A dissonant interval can suggest instability, but it does not guarantee a frightening response from every listener or in every scene. The Northern Film Orchestra’s horror-composition guide discusses dissonance, chromatic writing, sound design and restraint as usable approaches, not a mandatory key or chord. Read its five tips.
Use the note pair as a question, not a constant alarm. Hold C3 from bar 1, beat 1 through bar 2, beat 3, then stop it for a full beat of silence. Enter D-flat4 on beat 3 of bar 1, end it before beat 4, and leave C3 by itself through bar 2, beat 2. For the reveal, bring D-flat4 back sooner and add G3: C–G is an open fifth, but it does not erase the D-flat rubbing against C. You can audition C–G alone as a control version. If it feels too settled for the scene, restore the D-flat. This is an original exercise, not a transcription of a released soundtrack.
Dr Matt Lawson’s teaching example begins with words for a fictional scene, then considers sparse texture, dissonance and drone. His example is scored to a fixed film moment. In a game, keep the harmonic idea recognizable through an uncertain duration: the player may stand still for thirty seconds or turn the corner immediately. Read Lawson’s horror music lesson. For more on drones and pedal tones as general devices, use our game music theory guide.
Turn a familiar sound into an uneasy texture
Record a sound you own, such as a soft tap on a wooden tabletop. Trim the start. Make a second copy, add a long reverb tail, then render or record the processed copy, including the full tail, to a new audio file. Lower its level and reverse that rendered file so the tail becomes a swell into the tap. Keep the dry original separate. If you use Ableton Live 12, its Clip View manual says the Reverse button creates a new reversed sample; saving the Set places it under Samples/Processed/Reverse. Check Ableton’s Clip View manual. The method works without that software: any editor that reverses audio can make the swell. Do not use a recording you lack permission to reuse.
Keep the processed tap quiet enough to be mistaken for a sound in the space, then remove it entirely for one repetition. This makes the timbre a compositional event instead of wallpaper. On the reveal, shorten its tail and place the dry tap on a beat so the player can recognize it as part of the score. Change one property at a time: a lower register, a narrower stereo field, or a stronger transient. That comparison tells you which change matters. The Musical U tutorial uses voice, violin, choir and effects to shape a horror song; its examples are useful listening prompts, but this exercise uses one original recording to stay tied to a game cue. See the Musical U examples.
Leave effects off the footsteps and dialogue tracks. If your swell masks a door latch that tells the player where the threat is, lower it or move its entry. The article’s texture is an illustrative design proposal; no in-game listening test has been performed for this cue.
Disturb the pulse without losing the phrase
In bar 3 of the unseen version, play C4 as an eighth note on beat 1, D-flat4 as a quarter note on beat 2, and G3 as an eighth note on beat 3. In bar 3 of the revealed version, omit C4, move D-flat4 to the “and” of beat 1, and keep G3 on beat 3. Leave rests between those notes. The shared pitches keep the figure recognizable while the changed entry disturbs its timing. Richard Pryn groups repetition, silence and rhythm changes among his horror-writing techniques; his list offers options, not proof that any one trick will scare a player. Read Pryn’s guide.
Try this with a metronome before adding a drum track. The cue can have a pulse without a kick on every beat. If you want a stronger reveal, put a low hit on beat 1 of bar 3 and leave beat 4 empty. The empty beat leaves room before bar 4. Avoid making every variation louder: a single dropped note is often easier to hear than another layer in an already dense mix.
Write the same cue with and without the reveal
Create two four-bar passes. Notes below use scientific pitch notation, 4/4 and the illustrative 72 BPM tempo. All notes end at their stated points; trim or lower effect tails so they do not spill into an intended rest. The table is a composition sketch, not a MIDI file or a claim about a tested game. Copy the unseen pass first, then duplicate it and change only the entries in the Threat revealed column.
| Bar | Unseen threat | Threat revealed | Why the change matters |
|---|---|---|---|
| 1 | C3 drone enters on beat 1 and sustains through beat 4. D-flat4 enters on beat 3 and ends before beat 4. | C3 enters on beat 1 and sustains through beat 4. D-flat4 enters on beat 1, ends after beat 2, and is silent on beats 3–4. A quiet dry tap sounds on beat 3 and ends within that beat. | The earlier clash acknowledges something visible without changing the cue’s identity. |
| 2 | C3 continues through beat 3 and ends before beat 4. A reversed swell starts on beat 2, rises into beat 3, and ends within beat 3. Beat 4 is silent in every layer. | C3 continues through beat 3 and ends before beat 4. A shorter reversed swell starts on the “and” of beat 2, rises into beat 3, and ends within beat 3; G3 enters on beat 3 and ends before beat 4. Beat 4 is silent in every layer. | The added pitch thickens the sound, while the rest preserves space for game audio. |
| 3 | C3 re-enters on beat 1, holds through beat 3, and ends before beat 4. C4 lasts one eighth from beat 1; D-flat4 lasts one quarter from beat 2; G3 lasts one eighth from beat 3. Beat 4 is silent. | C3 re-enters on beat 1, holds through beat 3, and ends before beat 4. A low hit sounds on beat 1 and ends within that beat; D-flat4 lasts one quarter from beat 1-and; G3 lasts one eighth from beat 3. Beat 4 is silent. | The missing C4 attack shifts the expected pattern; the hit marks the reveal. |
| 4 | C3 re-enters on beat 1, sustains through beat 2, and ends before beat 3. Beats 3–4 are silent in every layer. | C3 and D-flat4 re-enter on beat 1, sustain through beat 2, and end before beat 3. Beats 3–4 are silent in every layer. | Both versions can loop without a tidy cadence or a nonstop wall of sound. |
Listen to the two passes at the same playback level. If the reveal reads as “victory,” remove G3 or soften the low hit. If the unseen pass announces the danger too clearly, delay D-flat4 or remove the reverse swell. Preserve at least one shared element, such as the C3 anchor, so the change feels like a response to the same place rather than an unrelated track.
For an even simpler comparison, mute everything except C3 and the three-note figure. If those two tracks already make the difference legible, the processed tap may be unnecessary. The point is to decide what the player needs to know at each moment, then earn every added sound.
Leave room for the game to be frightening
Plan three listening checks with the playable scene. First, walk the corridor at the intended pace while footsteps and any dialogue are active. Note whether the reversed swell hides a directional cue. Second, remain still through several loops: listen for an exposed seam between bar 4 and bar 1, and for a supposedly rare accent that repeats too often. Third, trigger the reveal at different points in the phrase. If the transition cuts a sustained D-flat abruptly, ask the audio implementer for a suitable exit point or a short fade. Our stem delivery guide covers organizing separate parts for that handoff.
These are proposed checks, not results from a build. A screenshot of a DAW or a waveform cannot tell you whether the cue leaves room for footsteps. Ask a listener who has not seen your timeline what they think changes between the two passes, then compare that account with the scene’s intent. If they cannot distinguish “uncertain” from “visible,” change one musical variable and listen again.
Keep a clean export of the dry tap and the two cue passes. Label the original recording and its permission status in your project notes. That helps you revisit the texture later without guessing which file was processed or whether it can ship.
FAQ: Composing horror music for games
Do I need a minor key to write horror music?
No. Start with the scene and test register, dissonance, texture and silence. A minor key can be one option, but it is not a guarantee that the cue will feel frightening.
How long should a horror game loop be?
There is no fixed length. Make it long enough that its most obvious accent does not become irritating during repeated play, then test it while the player waits and moves.
How can I make a reveal feel related to the earlier cue?
Keep one identifiable element, such as the C3 drone or a three-note figure, and change its entry, density or register when the threat appears.
Should horror music play constantly?
No. Leave rests where footsteps, dialogue or a sound cue needs attention. Compare the scene with and without music before deciding where the cue should enter.
What should I test before handing the cue to a game team?
Listen with gameplay sounds, repeat the loop while standing still, and trigger the reveal at several points. Check the transition, the loop seam and whether the score masks useful audio.





