Luminous harmonic pathways above a MIDI keyboard leading toward an imagined game landscape

Choose a chord progression for a game cue by deciding what the scene needs to sustain, then play the final chord straight into the first. The ten patterns below give you actual chords to audition, from a simple major cadence to minor and modal loops. Each scene is an illustrative writing prompt, not a claim that a named game uses those chords. Keep the pattern that supports the action after several repeats, and change its rhythm, voicing, or melody before deciding it is finished.

Choose for the scene, then read the numerals

Roman numerals name chords by their position in a key, so you can transpose a pattern without changing its relationships. Uppercase means a major triad; lowercase means minor. Throughout this guide, accidentals are measured against the parallel major scale: in C, ♭VII is B♭ major; in A minor, ♭III, ♭VI and ♭VII are C, F and G major. For the minor-key examples here, i is A minor unless noted. A major V in A minor is E major, with G♯ as its raised leading tone. Open Music Theory’s minor-harmony lesson uses the lowered-degree convention; its scale lesson explains the raised seventh, and its triad lesson identifies the major V in minor.

Do not treat a progression as an emotion preset. Tempo, melody, register, sound, and the game state change what a player hears. Composer Austin Wintory describes Journey as intimate despite its large scale in his PlayStation account of the score. Composer Winifred Phillips says the jazz harmonic language of Spyder suited that project’s setting in her account of composing for the game. Neither example implies that one of the patterns below appears in those scores; both show why scene context comes before a chord list.

Ten chord progressions to audition

The chord names are playable starting points, with one chord per bar in 4/4 unless a section says otherwise. The scene suggestions are original examples. Play the top notes as a simple two-note line before adding an elaborate melody. The patterns draw on the teaching examples and explanations from Native Instruments, Pianote, and Musical U; their game uses and loop checks here are editorial exercises.

Pattern Chord names Illustrative scene Return to bar one
I–IV–V–I C–F–G–C Clear tutorial success Hold C across the boundary
ii–V–I Dm–G–C Short reward sting C returns to Dm; add a reset bar
I–V–vi–IV C–G–Am–F Travel montage F returns gently to C
I–vi–IV–V C–Am–F–G Town theme G resolves into C
I–III–IV–iv C–E–F–Fm Changed memory Fm’s A♭ falls to G in C
vi–ii–V–I Am–Dm–G–C End-of-level reward C returns to Am through a shared E
i–iv–V–i Am–Dm–E–Am Contained confrontation Hold Am across the boundary
i–♭VII–♭VI–V Am–G–F–E Escalating encounter E pulls firmly back to Am
i–IV–i–♭VII (Dorian) Dm–G–Dm–C Exploratory puzzle C settles into Dm without C♯
I–♭VII–IV–I (Mixolydian) C–B♭–F–C Wide landscape Rest over B♭, then hold C through F–C

1. I–IV–V–I: give the listener a clear home

In C major, play C (C–E–G), F (F–A–C), G (G–B–D), then C. This is the plainest arrival in the set: the G chord contains B, which can rise a semitone to C. Try it for a tutorial complete cue where the player needs a clear moment of arrival. Put C in the top voice of the F chord and B on G; that makes the final move audible without a large leap. The last chord is already the first chord, so a loop may sound like two bars of C unless you change the bass or melody at the seam. Musical U’s progression lesson discusses the basic I, IV, and V family.

2. ii–V–I: make a compact arrival

Play Dm (D–F–A), G (G–B–D), C (C–E–G). Unlike the four-bar patterns, this is a three-chord cadence; give each chord two beats, then let C occupy the rest of a two-bar reward sting. The F in Dm can move to E in C, while B in G rises to C. For a continuously looping cue, the strong arrival on C can make each restart obvious. Add a bar of C with a changing melody, or use this as an event cue rather than hiding its cadence. Berklee Online describes ii–V–I as a route back to I.

3. I–V–vi–IV: defer the return

C–G–Am–F keeps moving after the dominant instead of landing immediately on C. Try one chord per bar for a travel montage that can repeat without a full stop. A playable upper line is E–D–C–C; repeat C as the first upper note when the loop restarts, then return to E later in the first bar. C belongs to both the final F and the opening C chord. Check the bass jump from F to C at the boundary; if it draws too much attention, invert the final F as F/A or let a C pedal continue underneath. Pianote gives these chord names in C for this common sequence. The cue’s specific rhythm and melody remain your own decisions.

4. I–vi–IV–V: end on an invitation

Use C–Am–F–G. The first move keeps C and E as common tones between C and Am; the last move places G just before the returning C. A quiet town scene could hold each chord for two bars and let the melody repeat with a different ending on the second pass. Put the top voice on G over C, A over Am, A over F, then B over G; B can rise to C at the restart. Compared with I–V–vi–IV, this sequence reserves its dominant for the loop boundary, so the return is more pointed. Native Instruments includes the I–vi–IV–V family among its examples.

5. I–III–IV–iv: change one note at a time

In C, play C–E–F–Fm. E major (E–G♯–B) is a chromatic III, and F minor (F–A♭–C) borrows its A♭ from C minor. This is deliberately outside the all-white-key set. For an illustrative memory scene that shifts from familiar to uneasy, keep C in the top voice over F and Fm, then move the A♭ of Fm down to G as C returns. That half-step is the seam’s main event; make it quiet if the cue will repeat often. Berklee discusses I–III–IV–iv and the borrowed minor iv. Do not flatten III into iii: E minor would be a different progression.

6. vi–ii–V–I: extend the cadence

In C major, play Am (A–C–E), Dm (D–F–A), G (G–B–D), then C (C–E–G). This adds vi before the ii–V–I cadence in example 2; its four-chord order is not a rotation of the C–G–Am–F loop in example 3. Try one chord per bar for an illustrative end-of-level reward. Voice the upper notes E–F–G–E, then keep E as the upper note when C returns to Am at the loop seam: E belongs to both chords. The G–C move provides the cadence inside the pattern; the C–Am move is the actual repeat boundary. Berklee Online identifies vi–ii–V–I as an extension of ii–V–I; the scene and voicing here are original exercises.

7. i–iv–V–i: let minor resolve

Am–Dm–E–Am starts in minor but uses E major, not E minor. Its G♯ is outside A natural minor and points toward A. For an illustrative contained confrontation, play Am and Dm in low register, then put G♯ in the upper voice of E before the final A. A four-bar loop ends on the same Am that begins it. If that produces an overlong tonic, shorten the last Am to two beats and leave a two-beat rest before bar one. Open Music Theory explains the raised seventh in minor and lists V as a major triad in its minor-key harmony table.

8. i–♭VII–♭VI–V: descend toward the restart

In A minor, Am–G–F–E makes the roots A–G–F–E descend while the E major chord restores G♯ for a strong return to A. The flats in the numeral labels are relative to A major; G and F are ordinary chords in A natural minor. Try one chord every two beats for an escalating encounter. An upper line of E–D–C–B uses a chord tone on each triad: E belongs to Am, D to G, C to F, and B to E major; at the seam, B can rise to C in Am. If that makes the loop feel too relentless, double the length of Am on every second cycle. Pianote’s minor progression example supplies the Am–G–F–E chord sequence; the upper line is an original exercise inferred from those chord spellings.

9. i–IV–i–♭VII: hear the Dorian sixth

Move to D Dorian: Dm (D–F–A), G (G–B–D), Dm, C (C–E–G). G major carries B natural, the raised sixth that distinguishes D Dorian from D natural minor, where the iv chord would be G minor. Berklee Online’s direct lesson on modes explains that raised sixth; the particular Dm–G–Dm–C order is an original exercise built from the D Dorian notes, not a sequence attributed to Berklee. For an illustrative puzzle cue, hold D as a pedal beneath the first three bars and let the G chord color it. Return from C to Dm without adding C♯; adding that leading tone would pull the passage toward a different minor-key cadence. For more on the mode, see our Dorian mode guide.

10. I–♭VII–IV–I: avoid the major-key dominant

Use C–B♭–F–C for a C Mixolydian center. Pianote teaches C–B♭–F as a Mixolydian progression; repeating C at the end is our loop-writing choice. The B♭ chord supplies the flattened seventh, so this pattern never needs G major’s B natural to return home. Try it for an illustrative wide-landscape cue: keep C in the top voice of C, F, and the final C. C is not in the B♭ major triad, so either rest that voice over B♭ or sustain C deliberately as an added ninth; then let the top C remain through F–C. The return from F to C has no leading-tone motion like V–I. A mode is a tonal choice, not a guaranteed mood; test the pattern against the actual scene.

Turn one pattern into an eight-bar cue

Here is an original, untested writing exercise using pattern 9. In 4/4, assign bars 1–4 to Dm–G–Dm–C and repeat those chords in bars 5–8. In the first pass, voice Dm as D–A–F and G as G–B–D; keep D near the top. In the second pass, move the top notes to F–G–A–G while the harmony stays fixed. Hold a low D through bars 1–3, then let C take the bass in bar 4. This gives the player a recognisable harmonic setting while the surface changes. Check every melody note against the chord under it, especially B over G; if a note clashes, decide whether it is a brief passing note or an unwanted sustained tension.

Once the harmony works, decide how the cue reacts to play. An exploration layer might carry the same chord roots with fewer notes, while an active layer adds the upper line; both must agree at their shared transition points. This is a composition sketch, not a tested implementation recipe. For the broader theory behind pedals and modes, see our game music theory guide. If you are writing with restricted chip channels, our first chiptune loop exercise shows how to distribute roles without filling every channel with full chords.

Check the return to bar one

Play each pattern through twice without stopping, and listen specifically across the last-to-first chord pair. First, check the bass: does its leap sound like a deliberate pickup or an accidental reset? Next, solo the upper voice: does it finish a phrase before the harmony repeats, or does it collide with its own opening? Then change only one variable at a time—last-chord length, inversion, bass note, or first melody note—and compare. Berklee’s songwriting guidance highlights how changing chord frequency alters the effect of the same progression.

The harmonic seam is only one part of a game loop. Composer Winifred Phillips notes that a repeating combat track also needs internal variety in her discussion of interactive music. After the chord return works, check the audio edit and any layered stems separately; our stem delivery guide covers that production handoff. A musically smooth turnaround cannot by itself fix a click, tail cutoff, or mismatched stem length.

FAQ: Choosing chords for game music

How many chords does a game loop need?

There is no fixed number. Start with two to four chords that support the scene, then repeat them while testing whether the melody and arrangement stay useful over several cycles.

Must the last chord resolve to the first?

No. A strong V–I return suits a clear arrival; a softer IV–I or ♭VII–i return may keep exploration open. Play the seam in context and choose the degree of arrival deliberately.

Can I use a familiar progression in an original cue?

Yes, as a starting point for composition. Change the melody, rhythm, voicing, instrumentation, and interaction design to serve your game; do not assume the chord sequence alone makes a cue distinctive.

Why does E major appear in an A minor progression?

E major contains G♯, a raised leading tone that points toward A. E minor contains G natural and creates a less forceful return. Both are choices, but they sound different.

What should I fix if the loop sounds repetitive?

Keep the harmonic pattern temporarily and vary one element: chord-change rate, melody ending, bass register, or density on the second pass. If those changes do not help, try a different progression.

Keep reading

TheoryChoose Chords for a Melody You Already HaveTheoryWrite Two Independent Lines for a Game CueTheoryDorian Mode in Game Music: Unlocking the Sound of Adventure
GameScoreCraft Editorial

Practical guides for game composers. Each guide links the documentation, published surveys and maker pages it relies on, so you can check the claims yourself. About us · Report an error